Select IEEE 802.11be MxN from the Quick Setups node.
Set Generation Mode to EHT Trigger Based PPDU under the Waveform Setup node.
Configure the allocation index for each 20-MHz subband under the Signal Configuration node. The EHT Trigger-Based PPDU may consist of more than one resource unit (RU) or multiple resource unit (MRU). (Refer to Table 36-35—RU Allocation subfield of specification IEEE P802.11be/D1.0.)
Each RU/MRU (except the first one) can be set on or off individually, which is different from DL OFDMA in EHT MU PPDU. If it is off, the RU/MRU is not used for data transmission (only the preamble portion exists).
Impairment parameters can be applied to the entire trigger-based PPDU bandwidth or to each individual user.
